Toshiba GRZ100-211B, Instruction Manual

Page: 203 / 463


202

6 F 2 S 0 8 3 4
／２ Ｄｉｒｅｃｔｉｏｎ
Ｐｈａｓｅ Ａ： Ｆｏｒｗａｒｄ
Ｐｈａｓｅ Ｂ： Ｆｏｒｗａｒｄ
Ｐｈａｓｅ Ｃ： Ｆｏｒｗａｒｄ
Note: If the load current is less than 0.04xIn, the direction is expressed as “----“.
The BFL element is used to detect the direction of load current and shared with blinder. (See
Figure 2.4.1.13.)
4.2.5 Viewing the Settings
The sub-menu "Setting (view)" is used to view the settings made using the sub-menu "Setting
(change)".
The following items are displayed:
Relay version
Description
Relay address in the RSM or IEC60870-5-103 communication
Recording setting
Status setting
Protection setting
Binary input setting
Binary output setting
LED setting
Enter a number on the LCD to display each item as described in the previous sections.
4.2.5.1 Relay Version
To view the relay version, do the following.
•
Press 3 (= Setting (view)) on the main "MENU" screen to display the "Setting (view)" screen.
/ 1 S e t t i n g
1 = V e r s i o n
( v i e w )
2 = D e s c r i p t i o n 3 = C o m m
4 = R e c o r d
7 = B i n a r y i 5 = S t a t u s
6 = P r o t e c t i o n
n p u t 8 = B i n a y r t o u t p u
9 = L E D
.
•
Press 1 (= Version) on the "Setting (view)" screen and the "Relay version" screen appears.
／２ Ｒｅｌａｙ ｖｅｒｓｉｏｎ ３／ ６
Ｒｅｌａｙ ｔｙｐｅ： ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
Ｓｅｒｉａｌ Ｎｏ．： ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
Ｍａｉｎ ｓｏｆｔｗａｒｅ： ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
ＣＯＭ ｓｏｆｔｗａｒｅ： ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
ＰＬＣ ｄａｔａ： ＊＊＊＊＊＊＊＊＊＊＊＊（＊＊＊＊＊＊＊＊）
ＩＥＣ１０３ ｄａｔａ： ＊＊＊＊＊＊＊＊＊＊＊＊（＊＊＊＊＊＊＊＊）
4.2.5.2 Settings
The "Description", "Comm.", "Record", "Status", "Protection", "Binary input", "Binary output"
and "LED" screens display the current settings input using the "Setting (change)" sub-menu.
www
. ElectricalPartManuals
. com