Toshiba GRZ100-211B, Instruction Manual

Page: 210 / 463


209

6 F 2 S 0 8 3 4
Setting the fault recording
•
Press 1 (= Fault record) to display the "Fault record" screen.
r e c o r d
r
1 _
1 1 / / 3
0 = O f f
a u t
F
l
1 = O n
l o c a t o
a u t F l
•
Enter 1 (= On) to record the fault location.
Enter 0 (= Off) not to record the fault location.
•
Press the ENTER key.
Setting the event recording
•
Press 2 (= Event record) to display the "Event record" screen.
／３ Ｅｖｅｎｔ ｒｅｃｏｒｄ １／１２９
ＢＩＴＲＮ（ ０－ １２８）： １２８ ＿
ＥＶ１ （ ０－ ３０７１）： ０
ＥＶ２ （ ０－ ３０７１）： １
ＥＶ３ （ ０－ ３０７１）： １
ＥＶ４ （ ０－ ３０７１）： １
ＥＶ５ （ ０－ ３０７１）： ３０７１
ＥＶ６ （ ０－ ３０７１）： ３０７１
ＥＶ７ （ ０－ ３０７１）： ３０７１
ＥＶ８ （ ０－ ３０７１）： ３０７１
ＥＶ９ （ ０－ ３０７１）： ３０７１
ＥＶ１０ （ ０－ ３０７１）： ３０７１
：
：
：
ＥＶ１２８（ ０－ ３０７１）： ３０７１
<BITRN>
•
Enter the number of event to record the status change both to "On" and "Off". If enter 20, both
status change is recorded for EV1 to EV20 events and only the status change to "On" is
recorded for EV21 to EV128 events.
<EV
∗
>
•
Enter the signal number to record as the event in Appendix B. It is recommended that this
setting can be performed by RSM100 because the signal name cannot be entered by LCD
screen. (Refer to Section 3.4.2.)
Setting the disturbance recording
•
Press 3 (= Disturbance record) to display the "Disturbance record" screen.
e 2 = S c h e m s w i t c h
/ 3 D i s t u r b a n c e r e c r o d
g i s n a y 3 = B i n r a l
1 = R e c o r
m t i e t & s t a r e r
d
•
Press 1 (= Record time & starter) to display the "Record time & starter" screen.
www
. ElectricalPartManuals
. com