Toshiba GA-1200 Setup Manual Download

Page: 82 / 152

8 TopAccess ADMINISTRATION TAB PAGE - SETUP

MENU (Scanning Function)

80 Setting up Email Settings

Setting up Email Settings

An administrator can configure the Email settings that are needed for Scan to Email operations
in the Email submenu page in the Setup menu.

Some settings may not be applied to the display on the equipment immediately upon saving.
The settings will be updated by pressing the [FUNCTION CLEAR] button on the control panel or
after an Auto Clear time period.

Setting up Email settings

Select the [Administration] tab, enter the administrator's password
and click [Login].

To access the TopAccess administrator mode, see the

Setup Guide for Printing

Functions

Click the Setup menu and Email submenu.

The Email submenu page is displayed.

In the Email submenu page, configure the Email settings as
required.

The following setting can be configured in this page:

P.81 “Email Settings”

Summary of Contents for GA-1200

























































































































































Search results

Summary of Contents for GA-1200

Reviews:

Related manuals for GA-1200

Brands by name

Popular brands

Toshiba GA-1200, Setup Manual

Search results

Summary of Contents for GA-1200

Reviews:

Related manuals for GA-1200

Brands by name

Popular brands