Toshiba GA-1200 Setup Manual Download Page 129

Page: 129 / 152

Registering Public Templates 127

5) Exposure

Specify the exposure (density) level of the scanned image.
Select "Auto" to automatically apply the most suitable density level according to the original.
If you want to adjust it manually, 7 levels are provided.

6) Original Size

Select the detection method of original size with the Reversing Automatic Document Feeder.

Auto:

An original size is automatically detected, but the mixed size originals cannot be

used.

Mixed Original Sizes:

Original sizes are automatically detected, and the mixed size

originals can be used.

To enable the Original Size function, the Reversing Automatic Document Feeder (optional) is
required.

Resetting Public Templates

You can reset a template already defined to the undefined one.
You can reset either all templates or only the selected one.

P.127 “Resetting selected public templates”

P.129 “Resetting all public templates in one go”

Resetting selected public templates

Select the [Administration] tab, enter the administrator's password
and click [Login].

To access the TopAccess administrator mode, see the

Setup Guide for Printing

Functions

Click the Registration menu and the Public Template submenu.

The Public Template submenu page is displayed.

Summary of Contents for GA-1200

























































































































































Search results

Summary of Contents for GA-1200

Reviews:

Related manuals for GA-1200

Brands by name

Popular brands

Toshiba GA-1200, Setup Manual

Search results

Summary of Contents for GA-1200

Reviews:

Related manuals for GA-1200

Brands by name

Popular brands