manualshive.com logo in svg

Toshiba e-Studio477s, Advanced Manual, Page: 98 / 264

Share
Download
Toshiba e-Studio477s Advanced Manual Download Page 98

USEFUL FUNCTIONS

- 98 -

2

1

3

4

5

6

7

2

Press the corresponding button(s) for the 
desired search category and enter the 

search string. Finally, press [SEARCH].

Pressing each button displays an on-screen keyboard. 
Enter a search string using the keyboard and digital keys, 
and then press [OK] to set the entry.

Memo

• The contacts are searched for based on the entered 

search string(s).

3

Press 

 for the desired contacts and 

then press [OK].

• For Scan to E-mail, proceed to step 4.
• For Internet faxing, the e-mail addresses are specified. 

To specify additional e-mail addresses, repeat the 
above steps.

Memo

•For Scan to E-mail, pressing [SEARCH ADDRESS] 

or [SEARCH GROUP] allows you to continue 
searching for individual contacts or groups with other 
search strings.

•Pressing 

or 

allows you to skip 5 pages

4

Press [OK].

Memo

• If you want to view or delete the specified e-mail 

addresses, press [DESTINATION].

P.102 "Viewing/Deleting specified e-mail addresses"

Searching the LDAP server with search strings

Note

• To search an LDAP server for e-mail addresses, the network 

administrator must register the directory service on 
TopAccess.

1

Press [SEARCH].

The ADDRESS SEARCH screen appears.

2

Select the directory service name that you 
want to search in the LOCATION.

1) Click the pull-down menu.
2) Select the directory service name that you want to 

search.

Summary of Contents for e-Studio477s









































































































































































































































































Reviews:

No comments