Toshiba e-Studio477s Advanced Manual Download Page 100

Page: 100 / 264

USEFUL FUNCTIONS

- 100 -

Refining groups search

Click the pull-up menu, and then select the
letters that you want to display.

1) Click the pull-up menu.
2) Select the letters that you want to display.

Addresses with the selected letter(s) first are displayed.

Select the desired group. For Scan to E-
mail, press [OK] at the end.

Memo

• To view e-mail addresses registered in a group, press

[CONTENTS].

• Before pressing [OK], you can specify additional e-mail

addresses.

• If you want to view or delete the specified e-mail

addresses, press [DESTINATION].



P.102 "Viewing/Deleting specified e-mail
addresses"

Searching for groups with ID numbers

Press [GROUP] to display the [GROUP] tab.

Press [KNOWN ID].

Using the digital keys, enter the ID number
for the desired group, and then press [OK].

The page containing the group of the specified ID number
is displayed.

Select the desired group. For Scan to E-
mail, press [OK] at the end.

Memo

• To view e-mail addresses registered in a group, press

[CONTENTS].

• Before pressing [OK], you can specify additional e-mail

addresses.

• If you want to view or delete the specified e-mail

addresses, press [DESTINATION].



P.102 "Viewing/Deleting specified e-mail
addresses"

Summary of Contents for e-Studio477s








































































































































































































































































Search results

Summary of Contents for e-Studio477s

Reviews:

Toshiba e-Studio477s, Advanced Manual, Page: 100 / 264

Search results

Summary of Contents for e-Studio477s

Reviews: