Toshiba e-Studio477s Advanced Manual Download Page 144

Page: 144 / 264

SETTING ITEMS (USER)

- 144 -

Set the following items for each color mode (Full Color/Auto Color, Gray Scale, or Black mode).

Item name

Description

RESOLUTION

Press the button of the desired resolution (dpi) for scans.

ORIGINAL MODE

Press the button of the desired mode for scans. ([ORIGINAL MODE] is not available in Gray Scale mode.)

EXPOSURE

Select the desired exposure for scans.

To set the contrast manually, press

and set the desired contrast level.

To set the contrast automatically in accordance with the original, press [AUTO].

BACKGROUND
ADJUSTMENT

Select the desired background exposure for scans.

The higher the exposure set by pressing

, the lighter the background color.

The lower the exposure set by pressing

, the darker the background color.

Summary of Contents for e-Studio477s








































































































































































































































































Search results

Summary of Contents for e-Studio477s

Reviews:

Toshiba e-Studio477s, Advanced Manual, Page: 144 / 264

Search results

Summary of Contents for e-Studio477s

Reviews: