manualshive.com logo in svg

Toshiba e-Studio477s, Advanced Manual, Page: 222 / 264

Share
Download
Toshiba e-Studio477s Advanced Manual Download Page 222

MANAGING COUNTERS (COUNTER MENU)

- 222 -

2

1

3

4

5

6

7

1

On the DEPT. MANAGEMENT menu screen, 
press [DEPARTMENT MANAGEMENT].

The DEPARTMENT MANAGEMENT screen is displayed.

Memo

• For instructions on how to display the DEPT. 

MANAGEMENT menu screen, see the following page:

P.220 "Logging on as administrator"

2

Press [ENABLE] to use the Department 
Management function. Press [DISABLE] 
when not using.

Registering a new department code

You can register new department codes.

Note

• The Department Management function must be enabled 

after one or more department codes are registered.

P.221 "Enabling department codes"

1

On the DEPT. MANAGEMENT menu screen, 
press [DEPARTMENT REGISTRATION].

The DEPARTMENT CODE screen is displayed.

Memo

• For instructions on how to display the DEPT. 

MANAGEMENT menu screen, see the following page:

P.220 "Logging on as administrator"

2

Press an undefined button to create a new 
department, and then [ENTRY].

The on-screen keyboard is displayed.
For details of the on-screen keyboard, see the following 
page:

P.227 "On-screen keyboard"

Memo

• If the touch panel does not display an undefined 

department code, press 

 to display the next page.

3

Enter a department name and press [OK].

The REGISTER DEPARTMENT CODE screen is 
displayed.

4

Press [NEW CODE].

The on-screen keyboard is displayed.
For details of the on-screen keyboard, see the following 
page:

P.227 "On-screen keyboard"

5

Enter the department code and press [OK].

You will be returned to the REGISTER DEPARTMENT 
CODE screen.

Memo

• You can enter a department code of up to 63 

characters. Characters you can enter are as follows:
-Alphanumerics, “-”, “_”, and “.”

6

Press [OK].

The QUOTA screen is displayed.

Summary of Contents for e-Studio477s









































































































































































































































































Reviews:

No comments