manualshive.com logo in svg

Toshiba e-Studio477s, Advanced Manual, Page: 101 / 264

Share
Download
Toshiba e-Studio477s Advanced Manual Download Page 101

USEFUL FUNCTIONS

- 101 -

2

1

3

4

5

6

7

Searching for groups by name

1

Press [GROUP] to display the [GROUP] tab.

2

Press [SEARCH].

The GROUP SEARCH screen appears.

3

Press [GROUP NAME] and key in a search 
string for the desired group name. Finally, 
press [SEARCH].

Pressing [GROUP NAME] displays an on-screen 
keyboard. Enter a search string using the keyboard and 
digital keys, and then press [OK] to set the entry.

Memo

• The groups are searched for based on the entered 

search string.

4

Press the corresponding button(s) for the 
desired group(s), and then press [OK].

• For Scan to E-mail, proceed to step 5.
• For Internet faxing, the e-mail addresses are specified. 

To specify additional e-mail addresses, repeat the 
above steps.

Memo

• For Scan to E-mail, pressing [SEARCH ADDRESS] or 

[SEARCH GROUP] allows you to continue searching 
for individual contacts or groups with other search 
strings.

5

Press [OK].

Memo

• To view e-mail addresses registered in a group, press 

[CONTENTS].

• Before pressing [OK], you can specify additional e-mail 

addresses.

• If you want to view or delete the specified e-mail 

addresses, press [DESTINATION].

P.102 "Viewing/Deleting specified e-mail 
addresses"

Summary of Contents for e-Studio477s









































































































































































































































































Reviews:

No comments