Toshiba e-Studio477s Advanced Manual Download Page 181

Page: 181 / 264

SETTING ITEMS (ADMIN)

- 181 -

Setting the IPv6 protocol automatically (in a
stateful network environment)

On the IPv6 screen, specify the following
items as required and press

Note

• The link-local address cannot be used to connect to

network places across a router.

• [ENABLE] and [DISABLE] for the LLMNR protocol are

available when you select [ENABLE] for the IPv6
protocol.

Specify the following items as required and
press .

Note

• [ENABLE DHCP (IP Address)] and [ENABLE DHCP

(OPTIONS)] cannot be disabled simultaneously.

Item name

Description

IPv6 PROTOCOL

•

ENABLE

— Press this button

to enable the IPv6 protocol.

•

DISABLE

— Press this button

to disable the IPv6 protocol.

LLMNR

•

ENABLE

— Press [ENABLE]

to enable the LLMNR
(Linklocal Multicast Name
Resolution) protocol.

•

DISABLE

— Press [DISABLE]

to disable the LLMNR protocol.

ADDRESS MODE Select [STATEFUL] for the IPv6

addressing mode.

Link Local
Address

The unique address used in IPv6
is displayed.

Item name

Description

ENABLE DHCP
(IP Address)

•

ENABLE

— Press this button

to use the IPv6 address issued
by the DHCPv6 server.

•

DISABLE

— Press this button

to disable the IPv6 address
issued by the DHCPv6 server.

ENABLE DHCP
(OPTIONS)

•

ENABLE

— Press this button

to use the optional information
(IPv6 address for the DNS
server, etc.) other than the
IPv6 address for this
equipment issued by the
DHCPv6 server.

•

DISABLE

— Press this button

to not use the optional
information other than the IPv6
address for this equipment
issued by the DHCPv6 server.

FQDN Option

•

ENABLE

— Press this button

to assign a FQDN (Fully
Qualified Domain Name) using
the DNS server.

•

DISABLE

— Press this button

to not assign a FQDN using
the DNS server.

FQDN Update
Method

•

CLIENT

— Press this button to

update the DNS server from
this equipment.

•

SERVER

— Press this button

to update the DNS server from
the DHCPv6 server.

Summary of Contents for e-Studio477s








































































































































































































































































Search results

Summary of Contents for e-Studio477s

Reviews:

Toshiba e-Studio477s, Advanced Manual, Page: 181 / 264

Search results

Summary of Contents for e-Studio477s

Reviews: