Toshiba e-Studio477s, Advanced Manual, Page: 206 / 264

SETTING ITEMS (ADMIN)
- 206 -
2
1
3
4
5
6
7
Selecting WEP security mode
The WEP is a data encryption method using the WEP key
between the Access Point and other wireless devices.
Compared with WPA/WPA2/802.1X and WPAPSK/WPA2PSK,
the WEP is less security. If the wireless network is configured
in the Infrastructure Mode and the Access Point supports WPA/
WPA2/802.1X or WPAPSK/WPA2PSK, it is recommended to
use WPA/WPA2/802.1X or WPAPSK/WPA2PSK rather than
WEP.
1
Press [WEP] button and press [NEXT].
The WIRELESS ENCRYPTION - WEP screen is
displayed.
2
Enter the following items and press [NEXT].
• WEP ENCRYPTION
Select the bit length of the WEP key.
• KEY FORMAT
Select the character code for the WEP key.
• WEP KEY
Press this to enter the WEP key.
The maximum length of WEP key varies depending on
the WEP Encryption and Key Entry Method.
Memo
• When pressing [WEP], the letter entry screen is
displayed. Enter the value using the keyboard and
digital keys, and press [OK] to set the entry.
3
Specify the following items and press
[NEXT].
• TRANSMIT POWER
Select the low transmit power if you want to limit the area
that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
4
Confirm the settings and press [FINISH].
Memo
• If you want to change the settings, press [PREV] to
move back to the screen that you want to change and
then repeat the operation.
5
Press [YES], and wait until the setting is
reflected.
64 bit 128 bit 152 bit
HEX: 10 26 32
ASCII: 5 13 16