manualshive.com logo in svg

Toshiba e-Studio477s, Advanced Manual, Page: 202 / 264

Share
Download
Toshiba e-Studio477s Advanced Manual Download Page 202

SETTING ITEMS (ADMIN)

- 202 -

2

1

3

4

5

6

7

Note

• Press [ENABLE] to use the user name from Common 

Name in the User Certificate.

4

Enter the EAP user name using the 
keyboard and digital keys and press [OK].

The screen returns to the WIRELESS 
AUTHENTICATION (EAP-TLS) screen.

5

Press [NEXT].

The WIRELESS ENCRYPTION SETTINGS screen is 
displayed.

6

Specify the following items and press 
[NEXT].

• ENCRYPTION BETWEEN AP AND STA.

Select the encryption type that is used for the 
communication between Access Point and this 
equipment.

[TKIP]

 — Select this to use TKIP encryption. TKIP 

provides a different key for per packet with a message 
integrity check.  This key will be changed for every fixed 
interval.

[AES(CCMP)]

 — Select this to use AES encryption. AES 

is the next-generation cryptography algorithm that the 

U.S. government improves to replace the DES and 
3DES.

[DYNAMIC WEP]

 — Select this to use an encryption 

which automatically updates the WEP key. DYNAMIC 
WEP does so periodically as well as automatically.

Note

• To select [TKIP] or [AES (CCMP)], press [WPA] or 

[WPA2], or to select [DYNAMIC WEP], press [802.1X].

Memo

• The encryption intensity between each encryption is:

AES(CCMP) > TKIP > DYNAMIC WEP

7

Specify the following items and press 
[NEXT].

• TRANSMIT POWER

Select the low transmit power if you want to limit the area 
that the wireless communication is enabled. If you do not   
have to limit the area, select [100%].

8

Confirm the settings and press [FINISH].

Memo

• If you want to change the settings, press [PREV] to 

move back to the screen that you want to change and 
then repeat the operation.

Summary of Contents for e-Studio477s









































































































































































































































































Reviews:

No comments