manualshive.com logo in svg

Toshiba e-Studio477s, Advanced Manual, Page: 91 / 264

Share
Download
Toshiba e-Studio477s Advanced Manual Download Page 91

USEFUL FUNCTIONS

- 91 -

2

1

3

4

5

6

7

Selecting original mode

Select the original mode for the image quality best suited to 
your originals.

Note

• The Original Mode setting is not available when [GRAY 

SCALE] is selected for the color mode setting.

[TEXT]

 — Select this option to scan text originals.

[TEXT/PHOTO]

 — Select this option to scan originals 

containing text and photos. This option is available only when 
[BLACK] is selected for the color mode setting.

[PHOTO] 

— Select this option to scan originals containing 

photos printed on photographic paper.

[PRINTED IMAGE] 

— Select this option to scan originals as 

printed images. This option is available only when [FULL 
COLOR] or [AUTO COLOR] is selected for the color mode 
setting.

Changing orientation

With the rotation setting, you can change the orientation of 
your scans. If necessary, select the desired rotation pattern 
from the following options:

 — Select this option to rotate your scans 90 degrees to 

the right.

 — Select this option to scan originals without a change 

in orientation.

 — Select this option to rotate your scans 90 degrees to 

the left.

 — Select this option to rotate your scans 180 degrees.

Scanning 2-sided originals

With the Single/2-sided Scan setting, you can choose whether 
to scan your originals on both sides. Select from the following 
options:

Summary of Contents for e-Studio477s









































































































































































































































































Reviews:

No comments