manualshive.com logo in svg

Toshiba e-Studio477s, Advanced Manual, Page: 210 / 264

Share
Download
Toshiba e-Studio477s Advanced Manual Download Page 210

SETTING ITEMS (ADMIN)

- 210 -

2

1

3

4

5

6

7

3

Select the transmit power and press 
[NEXT].

Select the low transmit power if you want to limit the area 
that the wireless communication is enabled. If you do not 
have to limit the area, select [100%].

4

Confirm the settings and press [FINISH].

Memo

• If you want to change the settings, press [PREV] to 

move back to the screen that you want to change and 
then repeat the operation.

5

Press [YES], and wait until the setting is 
reflected.

Selecting no security mode

You can also set no security for wireless access.

Note

• If you do not set no security, anyone knows how the SSID 

can connect to the wireless network.  Therefore, it is 
recommended to set the security if it is possible.

1

Press [NONE] and press [NEXT].

The TRANSMIT POWER SETTINGS screen is displayed.

2

Select the transmit power and press [NEXT] 
button.

Select the low transmit power if you want to limit the area 
that the wireless communication is enabled. If you do not 
have to limit the area, select [100%].

3

Confirm the settings and press [FINISH] 
button.

Memo

• If you want to change the settings, press [PREV] to 

move back to the screen that you want to change and 
then repeat the operation.

Summary of Contents for e-Studio477s









































































































































































































































































Reviews:

No comments