manualshive.com logo in svg

Toshiba e-Studio477s, Advanced Manual, Page: 192 / 264

Share
Download
Toshiba e-Studio477s Advanced Manual Download Page 192

SETTING ITEMS (ADMIN)

- 192 -

2

1

3

4

5

6

7

8

Press [OK].

Importing the certificate begins.

Note

• Do not remove the USB storage device until the data 

transfer is complete. Removing the device while data 
are being transferred could destroy them or cause a 
malfunction of the equipment.

9

When importing the certificate is complete, 
press [OK].

You will be returned to the SECURITY screen.

10

Remove the USB storage device from the 
USB port on the equipment.

Exporting the device certificate

Memo

The file format of the exported device certificate will be PEM 
(extension .crt).

1

On the SECURITY screen, press 
[CERTIFICATE MANAGEMENT].

The CERTIFICATE MANAGEMENT screen is displayed.

2

Press [EXPORT].

A message appears prompting you to insert the USB 
storage device.

3

Connect your USB storage device to the 
USB port on the equipment, and press [OK].

The EXPORT CERTIFICATE screen is displayed.

4

Press [DEVICE CERTIFICATE].

Exporting the certificate begins.

Note

• Do not remove the USB storage device until the data 

transfer is complete. Removing the device while data 
are being transferred could destroy them or cause a 
malfunction of the equipment.

Summary of Contents for e-Studio477s









































































































































































































































































Reviews:

No comments