Toshiba e-studio 210c Operator'S Manual For Copying Functions Download Page 37

Page: 37 / 196

2-11

Precautions for Using the Reversing Automatic Document Feeder (optional)

Also, the following originals should be handled carefully:

(1) Folded or curled originals

should be smoothed out

before being used.

(2) Only originals with the

same width can be set at a

time. (Do not mix originals

with different widths.)

(3) Originals, two of which, when pinched between two fingers, can-

not be moved, or originals which are surface-treated may fail to

be separated properly.

When Using the Reversing Automatic Document Feeder (optional)

Do not use the following types of originals as they tend to misfeed or become damaged:

(1) Badly wrinkled or folded originals; in particu-

lar, originals whose leading edge is curled may

fail to be correctly fed.

(4) Clipped or stapled originals

(2) Originals with carbon paper

(5) Originals with holes or torn originals

(3) Taped, pasted or clipped (cut out) originals

(6) Damp originals

(7) OHP film originals

Summary of Contents for e-studio 210c





































































































































































































Search results

Summary of Contents for e-studio 210c

Reviews:

Related manuals for e-studio 210c

Brands by name

Popular brands

Toshiba e-studio 210c, Operator'S Manual For Copying Functions

Search results

Summary of Contents for e-studio 210c

Reviews:

Related manuals for e-studio 210c

Brands by name

Popular brands