TORXUN AUTOPED M10S.0028, Installation Manual, Page: 57 / 82

Autoped Installation Manual rev 2.0 (100722)
57
sensor
(E) EMY-IN (Emergency Open Input)
-0.0A ; 0° Displays motor current and the swing door
opening angle (Example: 2.1A ; 65°)
X.YA/Z° Displays the actual current used by the motor
and the current angle of the door/ gate panel.
Simulate Key Key command that opens the door panel by
pressing OK
E-Lock L- Display status of the lock
FB- Display input El-FB. Press OK to activate
the electric locking device (L+) locked
(L-) Unlocked
(FB+) Locked
(FB-) Unlocked
PG Version Packaged software
SW Version Version of software
UL Version Software changed due to UL specifications
HW Version Version of logic PCB
Cycles Total number of openings the gate has
performed.
RO R1 FP RP Display what the Door/Gate panel is doing
(R0) Relay print with address 0
(R1) N/A
(FP) N/A
(RP) N/A (-) Identified and ready for operation
(+) Neither identified nor registered
(a) Defective or error
(x) Removed
XII.9 REINIT MENU (RESET BACK TO FACTORY DEFAULT)
Device Description
FACTORY RESET All settings that were programmed into the control will be reset to factory defaults
PARAM RESET Resets/sets all motion parameters back to the default values (inclusive opening angle, rod assemblies,
invers and dAxis)
CONFIG RESET Resets all configuration settings back to the default values
DOUBLE RESET Resets simultaneous pair settings and airlock settings back to the default values
XII.10 BLOCK/UNBLOCK MENU: LOCK KEYS
Menu Description
Block? To lock the joystick Press ok for 2 seconds The display shows temporarily BLOC!
UBLOC? To unlock the joystick Press ok for 2 seconds The display shows temporarily UBLOC
BlockD When the joystick is blocked,
the “home display” shows BLOCKD if the joystick is operated!