TORXUN AUTOPED M10S.0028, Installation Manual, Page: 33 / 82

Autoped Installation Manual rev 2.0 (100722)
33
STEP 4 Gather the Spindle bolt, Positive Stop Clamp &
Spindle
STEP 5 Assemble the Stop Clamp and Spindle together
STEP 6 Insert Clamp and Spindle assembly to the Gearbox
IMPORTANT NOTE ON STEP 6
Make sure that the Stop Clamp* and Stop Spindle*
are
flush with each other when assembled (see
drawing above*).
Place the Stop Clamp so that its rounded vertical
face (contact point) is almost contacting the Positive
Stop Cam at full open.
STEP 7 Insert the Spindle Bolt to the Positive Stop Clamp*
and Stop Spindle*; tighten to fasten the assembly
to the Gearbox.