TORXUN AUTOPED M10S.0028, Installation Manual, Page: 35 / 82

Autoped Installation Manual rev 2.0 (100722)
35
VIII.1 ADJUSTING THE CLOSING-SPRING PRELOAD
The AutoPed operator is equipped with a closing spring that aids in the closure of the gate/door and to keep closing speeds while the
gate/door is in manual mode. When power to the operator is cut or turned off, the closing spring will allow the Door/Gate to close in a
controlled manner, fully latching the door lock system.
The tension of the spring regulates the amount of pressure the door requires to be pushed open.
Preload adjustment is done by turning the Adjusting Screw. By default, distance
X between top of head of Adjusting Screw and spring
bracket is:
X = 1-1/32 inch (26 mm)