Toro 136-0372, Installation Instructions Manual

Page: 29 / 64

Figure 58
1. Screw (6-32 x 5/8 inch) 5. Nut—stainless steel (6
mm—throttle-valve mount)
2. Handle 6. Washer-head screw
(#6—throttle-valve mount)
3. Agitation throttle valve 7. Agitation-valve bracket
4. Throttle-valve mount
(nylon) 8. Bolt (6 x 12 mm)
2. If not assembled, insert the 4 stainless steel nuts into
the slots in the nylon throttle-valve mount for the
agitation throttle valve (
Figure 58 ).
3. Assemble the agitation throttle valve into the
throttle-valve mount as shown in (
Figure 58 )
4. Secure the throttle-valve mount to the agitation throttle
valve with the screw (6-32 x 5/8 inch) as shown in
(
Figure 58 ).
5. Assemble the throttle valve and mount to the
agitation-valve bracket (
Figure 58 ) with the 4 bolt (6 x
12 mm).
Assembling the Eductor–Shutoff Valve
for Machines with the Optional Eductor
Kit
1. Align the hose in the eductor-shutoff bracket with the
studs of the eductor-shutoff valve as shown in
Figure
59 .
Figure 59
1. Flange locknut (1/4 inch) 3. Stud (eductor-shutoff
valve)
2. Eductor-shutoff bracket
2. Assemble the bracket to the valve ( Figure 59 ) with the
4 flange locknuts (1/4 inch)
3. Torque the flange locknuts to 1017 to 1243 N∙cm (90
to 110 in-lb).
Assembling the Throttle Valve for
Machines without the Optional Eductor
Kit
Note:
If your machine has the optional eductor kit, skip to
Assembling the Throttle Valve and Eductor-Shutoff Valve for
Machines with the Optional Eductor Kit (page 30)
.
1. Align the slots in the agitation-valve bracket with
the holes in the mount for the throttle-valve bracket
(
Figure 60 ).
Figure 60
1. Mount (throttle-valve
bracket) 3. Flange-head bolt (5/16 x
3/4 inch)
2. Agitation-valve bracket 4. Front of the machine
29