18
Installing the Supply Hose for
the Optional Eductor Kit
Parts needed for this procedure:
1
Eductor supply hose 2 x 88 cm (3/4 x 34-11/16 inches)
1
Retainer (small)
Procedure
1.
Align the straight barbed fitting of the eductor supply
hose 2 x 88 cm (3/4 x 34-11/16 inches) with the
gasket that you removed in step
of
the Optional Eductor Kit (page 9)
with the flange of
the eductor (
Figure 101
1.
Flange (eductor)
5.
Eductor supply hose 2
x 88 cm (3/4 x 34-11/16
inches)
2.
Gasket
6.
Bottom port
(eductor-shutoff valve)
3.
Flange clamp
7.
90° barbed fitting
4.
Straight barbed fitting
8.
Retainer (small)
2.
Loosely assemble the barbed fitting to the eductor
flange with the flange clamp that you removed in step
of
Disconnecting the Optional Eductor Kit (page 9)
3.
Route the eductor supply hose to the bottom of the
eductor-shutoff valve as shown in
47
Summary of Contents for 136-0372
Page 61: ...Schematics Flow Diagram Rev A 61...
Page 62: ...Notes...
Page 63: ...Notes...
Page 64: ......
