Toro 136-0372, Installation Instructions Manual

Page: 23 / 64

Figure 46
1. Black wire (4-pin
adapter—rate valve) 3. Blue wire (DIN wire
harness—master-spray
valve_
2. Black wire (3-pin
adapter—agitation valve) 4. Black wire (3-pin
adapter—master-spray
valve)
Wiring Table—Master-Spray Valve
Wire color
codes—DIN wire
harnesses Wire color
codes—4-pin
adapter for the
rate valve and
3-pin adapter for
the agitation valve Wire color
codes—3-pin
adapter
(master-spray
valve)
Brown
(master-spray
valve) Pink Pink
Blue (master-spray
valve) Black Black
Yellow/green
(master-spray
valve) Not applicable White
4. Insert the black wire of the 4-pin adapter for the rate
valve, black wire of the 3-pin adapter of the agitation
valve, and blue wires for the DIN wire harness into the
butt-splice connector on the black wire of the 3-pin
adapter for the master-spray valve.
5. Center the crimping tool over the butt-splice connector
and wires and crimp the connector securely.
6. Align the pink wire of the 4-pin adapter for the rate
valve and the pink wire of the 3-pin adapter of the
agitation valve, and the brown wire of the DIN wire
harness with the pink wire of the 3-pin adapter for
the master-spray valve; refer to the wire table for the
master-spray valve.
7. Insert the pink wire of the 4-pin adapter for the rate
valve, pink wire of the 3-pin adapter of the agitation
valve, and brown wires for the DIN wire harness into
the butt-splice connector on the pink wire of the 3-pin
adapter for the master-spray valve.
Figure 47
1. Pink wire (4-pin
adapter—rate valve) 3. Brown wire (DIN wire
harness—master spray
valve_
2. Pink wire (3-pin
adapter—agitation valve) 4. Pink wire (3-pin
adapter—master spray
valve)
8. Center the crimping tool over the butt-splice connector
and wires and crimp the connector securely.
9. Use a heat gun to shrink the insulating sleeves of the
3 butt-splice connectors.
23