Phoenix Pro User Manual
51
5.3.4 Launch Remote Diagnosis (Device-To-Device)
The Phoenix Pro handset is allowed to initiate remote diagnosis with other
diagnostic tools (including but not limited to the Phoenix Pro), which are
equipped with this module.
*Note: Before performing this operation, please make sure the following no matter
which side sends the remote request:
y
Turn on the vehicle power supply.
y
Throttle should be in a closed position.
y
The VCI should be properly connected to the vehicle’s DLC and a successful
communication with the tablet is required.
In Fig. 5-37, tap “Remote Diagnostic”, a pull-down menu including the following
options appears:
Fig. 5-38
These options are defined as follows:
Actions Results
Send remote
diagnostic reservation
Tap it and input the reservation title or scheduled date
of the remote diagnosis, and then tap “Confirm” to
send.
Request control
remote device
Request to control the partner’s device remotely to
help him diagnose the vehicle.
*Notes:
y
Remote diagnosis has the same diagnostic steps as
manual diagnosis.
y
In process of remote diagnosis, tap the
button to
send a voice message.
y
Once vehicle diagnosis is complete, a report will be
created. Input your comments on this report, and then
