Topdon Phoenix Pro User Manual Download

Page: 83 / 142

Phoenix Pro User Manual

Fig. 8-7

• Tap the user image to change it.

• Tap > next to “Free Upgrade Period” to check the due date of all diagnostic

software.

8.10 Change password

This item allows you to modify your login password.

8.11 Settings

It enables you to make some application settings and view software version
information etc.

8.11.1 Units

It is designed to configure the measurement unit. Metric System and English
System are available.

8.11.2 Shop Information

This option lets you define your print information. It mainly includes Workshop,
Address, Telephone, Fax and License Plate.

Fig. 8-8

After inputting, tap “Save”.

Once you saved the print information, it will be entered automatically in the “Add

Summary of Contents for Phoenix Pro















































































































































Search results

Summary of Contents for Phoenix Pro

Reviews:

Related manuals for Phoenix Pro

Brands by name

Popular brands

Topdon Phoenix Pro, User Manual

Search results

Summary of Contents for Phoenix Pro

Reviews:

Related manuals for Phoenix Pro

Brands by name

Popular brands