Tolomatic User Guide:
ICR Rod Style Integrated Control Actuator
6-1
How to Use the ICR/ICM SV1P Plus
6
The Tolomatic ICR/ICM SV1P Plus actuator incorporates Copley Controls Corporation
drive and control components and utilizes their software to communicate to logic
devices. References to software programs and manuals are provided where
applicable and are on the Tolomatic CD-ROM that shipped with the actuator. The
manuals and software are also available online. Web addresses are provided where
appropriate throughout this section.
6.1 Host Computer Requirements
The ICR/ICM SV1P Plus actuator is designed to be used with a host computer,
PLC or HMI device along with a power supply (see Section 4: Power Supply
Recommendations). Before installing the communication software, be sure the
supplied devices have the minimal host requirements indicated below.
6.1.1 Hardware Requirements
CPU: 400 Mhz
RAM: 128 MB
6.1.2 Operating Systems Supported
Windows
®
NT, 2000, XP, Vista
Notes for Windows
®
Vista users:
Windows
®
Vista is supported in the CME 2
®
Software supplied on the Tolomatic
CD-ROM shipped with the actuator.
On Installation in Windows
®
Vista:
When the installer starts, a message will be
displayed stating that an unidentified program is trying to access the computer.
Click the button to allow the installer to continue, and CME 2
®
will be installed
properly.
Program File Storage in Windows
®
Vista:
Other Windows
®
operating systems
store user data for CME 2
®
(ccx, ccm, files, etc.) in C:\Program Files\Copley Motion\
CME 2. Due to Windows
®
Vista security, user data is stored in C:\Users\Public\Public
Documents\Copley Motion\CME 2
®
.
6.1.3 Software Requirements
Copley Controls CME 2
®
(Copley Motion Explorer) software, Version 5.1 or higher.
