Document Ref 942583-001 Rev 8
Page 5-19
Quantium 510 Installation Manual
Installation
6) Move the dispenser to its final location.
7)
Position the dispenser over the cradle so
that the filter boxes are directly above the
fuel supply risers. Lower the dispenser
slowly, to about 150mm above the cradle,
aligning the mounting holes on the driptray
with the mounting holes on the cradle.
8)
Feed the cables up through the electrics hole
position in the driptray.
4)
Protect the dispenser panels with cardboard
or other suitable material, then strap the
dispenser to the forklift using a ratchet strap
or similar to ensure stability and safety.
5)
Raise the dispenser approximately 20mm
off the ground.
Using a 10mm spanner or socket, loosen
and remove the bolts holding the centre
wooden blocks connected to the metal
profiles. Remove the wooden blocks.
Locate the 19mm nuts holding the metal
profiles to the driptray. Unscrew the nuts,
remove the bolts and remove the metal
profiles.
