manualshive.com logo in svg

Toa N-CC1000 NTSC, Instruction Manual, Page: 49 / 72

Share
Download
Toa N-CC1000 NTSC Instruction Manual Download Page 49

N-CC1000/CC1110/VT1010 INSTRUCTION MANUAL (Applications)

4-3

CHAPTER 4. JetManager

4.2.2. Using On-Line Help

On-Line Help contains important information necessary for JetManager operation. The Help items are
separated by chapters. Help documents can be searched by topic and keywords. The Help window is divided
in two, with the navigation screen for searching the Help documents located at left and the selected Help
documents displayed at right. 

Contents
• If the "Contents" tab in the left-side window is clicked, the table of contents is displayed, classified by

chapters.

• Double-clicking the heading displays more detailed topics.
• If the topic is clicked and selected, the Help document of the selected topic is displayed in the right-side

window.

Index
• Click the "Index" tab in the left-side window. 
• Enter the first several characters of the keyword relating to what you want to know in the topmost text box.

Or click on one of the words shown in the list. 

• Clicking the "Display" button displays the Help document in the right-side window. 

Search
Searches can be performed for specific words not shown in the listed results of searches using the table of
contents or keyword. However, searches of the entire Help document require more time.
• Click the "Search" tab in the left-side window.
• Enter the first several characters of the word in the topmost text box, then click the "List Topics" button. The

list of topics is displayed. 

• Select the word from the displayed topic list and click it. If the "Display" button is clicked, the Help document

is displayed on the right-side window. 

Printout
The Help document can be printed out by selecting topics from the On-Line Help table of contents.
• Click the "Table of Contents" tab in the left-side window. 
• Double-click the heading to display topics, then click to select the topic to be printed.
• Click the "Print" button. 

4.2.3. Other Information

For information and help facilities regarding Windows or Windows network applications, refer to Windows on-
line help or the Windows instruction manual. 

Be sure to read the instruction manual of each video networking device because it contains important
information regarding setup and use. 

Summary of Contents for N-CC1000 NTSC









































































Reviews:

No comments