Toa N-CC1000 NTSC, Instruction Manual, Page: 23 / 72

N-CC1000/CC1110/VT1010 INSTRUCTION MANUAL (Applications) 3-5
CHAPTER 3. Performing Settings with Internet Explorer
Alarm Action
Alarm Output
Serial Port
Display Stamping (Refer to p. 3-25.)
Relay (Refer to p. 3-27.)
Mode (Refer to p. 3-28.)
Baud Rate (Refer to p. 3-28.)
Data Bits (Refer to p. 3-28.)
P
arity Check (Refer to p. 3-28.)
Stop Bits (Refer to p. 3-28.)
Interface Mode (Refer to p. 3-28.)
Auto Release (Refer to p. 3-27.)
Source (Refer to p. 3-27.)
Auto Connect (Refer to p. 3-25.)
Receiver IP Address (Refer to p. 3-25.)
Receiver Password (Refer to p. 3-25.)
Alarm E-mail (Refer to p. 3-25.)
E-mail Layout (Refer to p. 3-25.)
Send-To Address (Refer to p. 3-27.)
Reply-To Address (Refer to p. 3-27.)
Display Stamping settings
Relay ON/OFF and make/break settings
Serial port operation mode settings
Serial port transmission rate settings
Serial port data bits settings
Serial port parity check mode settings
Serial port stop bits settings
Serial port interface settings
Auto release reset settings
Alarm output source settings
Auto connect settings
E-mail transmission ON/OFF settings
E-mail layout settings
E-mail address settings for the sending destination
E-mail address settings for the reply destination
IP address settings for the PC to be automatically
connected.
Password settings for the PC to be automatically
connected.
Serial Port Setting Screen (Refer to p. 3-28.)
Alarm Trigger
Video Loss (Refer to p. 3-24.)
Alarm Input (Refer to p. 3-24.)
Video loss function ON/OFF settings
Alarm input ON/OFF and make/break settings
Alarm Setting Screen (Refer to p. 3-24.)