TLM PRIME 400, Use And Maintenance Handbook

Page: 65 / 71

Use and Maintenance Handbook
– Prime 400 Packaging Machine
Page 65 of 71
12.2 Extraordinary maintenance
12.2.1 Jaws resistance replacement
To replace the resistance (A), cut power off and wait till the machine cools down.

Remove the rear guard and the top guard of the machine.

Remove the fixing screws of the upper jaw (C).

Remove the screws and remove the blade (D).

Remove the fixing screws and remove the jaw (E).

Remove the two screws that tighten the two cables of the resistance to the
terminal.

Pull resistance cables to remove it from the jaw. (F)

Insert the new resistance in the slot.

Repeat the operations in a similar way for the other resistance.

To reassemble everything, repeat all operations backwards.
12.2.2
Jaws proximity sensor replacement
To replace the proximity sensor (B), cut power off and wait till the machine cools
down :

Remove the rear guard.

Remove the top guard of the machine.

Remove the sensor by acting on the nut and locknut through the use of two
hexagonal keys.

Install new sensor and tighten the nuts.

To reassemble everything, repeat all operations backwards.
A A
B
F
C
C
D
D
E
E