Use and Maintenance Handbook
– Prime 400 Packaging Machine
Page 46 of 71
11.
INSTRUCTIONS FOR USE
DURING ANY OPERATION CARRIED OUT ON THE SYSTEM, THE OPERATOR MUST
COMPLY WITH ALL THE ACCIDENT PREVENTION PRECAUTIONS, SAFETY
REGULATIONS AND THE WARNINGS SHOWN ON THE PLATES ON THE MACHINE. NO
EXCEPTIONS TO THE ABOVE MENTIONED REGULATIONS AND WARNINGS ARE
ALLOWED: THE MANUFACTURER DECLINES ALL LIABILITY FOR ANY INJURY TO
PERSONS OR MATERIAL CAUSED BY FAILURE TO OBSERVE THE ACCIDENT
PREVENTION REGULATIONS AND THE SAFETY STANDARDS.
The machine has been designed reducing any risks to the operator to the
minimum. Even though it is impossible to foresee all possible hazardous, the risk
of injury to persons and damage to this machine will be reduced considerably by
adhering to the safety regulations in this manual.
DO NOT ACTIVATE THE MACHINE IF THE PROTECTIONS INSTALLED HAVE BEEN
REMOVED OR TAMPERED WITH
The operators assigned to the machine must be aware of the safety operating
procedures and apply them at all times during its operation. In particular make
sure that all the protective devices are present, are in good condition and fixed
properly.
11.1
Operator
Operator means qualified personnel able to carry out the following operations:
Operation through the use of the installed controls.
Any
materials used
for
feeding operations
.
Any
discharge
of
materials used
.
Simple adjustment functions and starting up of the production cycle.
The restoration of production following enforced downtime.
Inspection, cleaning and lubrication.
