Use and Maintenance Handbook
– Prime 400 Packaging Machine
Page 61 of 71
11.5.7 Regulating Loading conveyor
The loading conveyor allows various regulations. The conveyor width can be
adjusted by turning the knob (A).
The conveyor can be adjusted longitudinally by acting on four knobs (B). Loosen
the knobs, moving the supports along the slots until the choosen position and
tighten the knobs.
11.5.8 Regulating the cut
To adjust the cutting pressure, act evenly on the dowels, to avoid irregular
wear of the blade. (C)
The adjustment phase of the cut must be performed with open jaws. To
regulate the pressure of the blade, act on the dowels (D) in the same way;
while adjusting the blade doesn’t come out from the slot.
If the cut isn’t optimal, because the package isn’t severed, operate on the
involved dowels, as stated above.
A
D
C
B
A
