Use and Maintenance Handbook
– Prime 400 Packaging Machine
Page 28 of 71
10.3.7
Thermic danger
While the machine is running, the welding group reach high level temperature:
pay maximum attention in order to avoid burning risk. Before acting on the
machine, to execute maintenance and/or cleaning operation, wait a certain period
of time (AT LEAST 30 MIN.) in order to allow the cooling at the heated elements.
The operation must be done wearing protective gloves against high temperatures
in order to prevent risk of accident.
10.3.8 Danger due to the intended use
In manual mode or in automatic mode, it is absolutely prohibited to avoid the
safety devices while the machine is running.
IN MANUAL MODE, the machine needs the protection to be inserted, by reducing
the production speed in order to allow and make easier the
machine’s fine tuning
and regulation.
IN AUTOMATIC MODE, the machine needs the protections inserted, at the end
of the fine tuning/regulation operation, the cycle is launch at the maximal speed
production.
To run, the machine needs the control of only one operator; during operation,
besides attendant operator, the operator must stand near the machine or
worse intervene on the same.
During the regulation, cleaning and maintenance, IT’S COMPULSORY TO
USE protective gloves in order to order to prevent risk of accident.
For any unintended use, or for any intervention that needs to be carried out on
the machine, THE USER HAS THE OBLIGATION TO INFORM the
manufacturer in regards of any contraindication or hazards caused by an
improper use.
The key for opening the protections, must be kept by the person in charge of
the machine. Leave the key insert in the lock, would involve the danger that an
unauthorized person enters in contact with the dangerous mobile parts of the
Machine.