Use and Maintenance Handbook
– Prime 400 Packaging Machine
Page 31 of 71
10.4.1
Mobile guards, access door to the internal components
The access to the internal parts of the machine is prevented by appropriate
perimetric guards, both fixed and movable, to access in case of maintenance
interventions. The guards are built complying with the technical standards of the
EN13857:2008 in order not to limit the visual productive cycle. (Made with
transparent Lexan panels and safety grating to favourite the internal control of the
automatic process). Movable guards are controlled by interlocking devices; in
case of their breakdown, all mobile parts are stopped in safety conditions.
10.4.2
Permanent guards
Fixed guards must only be removed when necessary by authorized maintenance
personnel and must always be replaced before the
machine
is started again.
All the fixed protections and guards are secured in such a way that deliberate
action must be required to remove them.
At the end of any maintenance work, it is necessary to replace the guards by
reinstalled them in the predetermined position.
The access, to all the others parts of the machine that can constitute a
danger for the safety of the operators are prevented by a series of
fixed/mobiles guards built in metal sheet panels.
Remember that the removal of the fixed guards by the person in
charge of the maintenance, involved his responsibility regarding his
safety and the others people safety.
