THUNDER TIGER E325 SE mini Titan, Manual

Page: 41 / 58

It always happens that the travel of each servo varies slightly. If so,
the swashplate would be tilted when giving a full collective pitch
command. These variations can be corrected by altering the travel
value of each servo slightly by using the “Travel Adjustment” function.
Pitch to Aileron Mixing
Place the collective stick to the full positive pitch position. Check the
swashplate from the rear of the model to insure if it’s level from left to
right. If the swashplate is not level as compared to the frame of the
model, adjust either the servos by using the “Travel Adjustment”
function.
For example, the swashplate has been tilted to the right side while
giving full positive collective pitch. It indicates that the left servo’s travel
is less than the right servo’s travel. You can either increase the travel
of left servo or decrease the travel of right servo. Check the swashplate
again to insure that it’s level.
It is necessary to repeat the procedure while giving full negative
collective pitch. Check if the swashplate is level and adjust the servos
as needed while the full negative collective pitch is given.
COLLECTIVE TO CYCLIC MIXING ADJUSTMENT
-40-
Decrease
Increase