THUNDER TIGER E325 SE mini Titan, Manual

Page: 48 / 58

-47-
Helicopters
Q: What would you check when the helicopter shakes during flying?
A:
Q: What would you do if there comes out a lot of noise from the
helicopter during flying?
A:
Motor, Battery and Speed Controller
Q: How to choose the motor and the pinion?
A: It depends on the battery and the motor. The following is the formula
of how to calculate the wanted head speed.
Motor RPM = Motor KV x Volt(3.7V) x Series x constant (0.8)
Head Speed = Motor RPM / Gear Ratio
Gear Ratio = 150T / Motor Pinion
Example:
We choose TT OBL 29/37-10H optional brushless motor.
If using a 3S(11.1V) Li-Po battery, the motor rpm should be
3700KV x 3.7V x 3S x 0.8=32856 rpm
And we expect to have the head speed of 2800~3000 rpm
32856 / Gear Ratio=2900
Gear Ratio=11.33
TROUBLE SHOOTING
Are the main blades out of track?
Are the paddles out of track?
Are the main blades well balanced?
Are the paddles well mounted at the same distance from the
rotor shaft?
Is the spindle or the flybar bent?
Is the main shaft bent?
Is the main rotor hub damaged?
Is the motor well installed and is the shaft of the motor bent?
Is the tail rotor shaft bent?
Is the tail rotor hub damaged?
Do all the ball bearings work well?
a. Please check the gear mesh between the main gear and the
motor pinion. If there is too much gear mesh, it would generate
a lot of gear noise during flying.
b. If the tail drive belt is too loose, it will bring about some noise
and may cause the failure of tail control.
c. Check the linkages and control system of main rotor and tail
rotor to make sure every linkage is working correctly and not
colliding with something else.
d. Check if the motor is running out of balance.
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.