THUNDER TIGER E325 SE mini Titan, Manual

Page: 33 / 58

No.
1
2
3
4
5
6
7
Description Q'ty
Wood / Carbon Main Blade
Rotor Spacer
Socket Screw, M3x20
Nylon Nut, M3
Upper Blade Grip
Lower Blade Grip
Countersunk Screw M1.6x6
2
2
2
2
2
2
2
-32-
For Wood Bla de s:
N ot e :
6mm
(1)
(4)
(3)
For Ca rbon Bla de s:
(6)
(5)
(1)
CA Glue or Epoxy
CA Glue or Epoxy
St e p 1
1.For safety concern, be sure to modify the main blades as following.
2.Mark around the blade grips with a felt tip marker.
3.Remove the blade grips and cut the covering gently around 1mm inside of the mark.
Be careful not to hurt the blades.
4.Sand the inside of the grips lightly for better adhesion. Apply CA or Epoxy to blades in
area as shown.
5.Attach blade grips and tighten the screws.
6.Wipe off the excess CA or Epoxy.
St e p 2
1.Secure the blades to the Main Rotor
Pitch Housing.
2.It is suggested to balance the blades.
(7)
St e p 1
1.Insert the Rotor Spacer into the Metal Main Rotor Pitch Housing.
2.Secure the Carbon Main Blades to the grips. Please dont over tighten the screws.
(3)
(4)
(2)
(1)
Main Rotor Blade Assembly