THUNDER TIGER E325 SE mini Titan, Manual

Page: 18 / 58

-17-
No.
1
2
3
4
5
Description Q'ty
1
1
1
1
1 Socket Screw M2x14
M2 Nut
Set Screw
Bearing d5xD11x5
Main Shaft Lock Ring
1.Install the Bearing into the Base Plate.
2.Slide the Main Gear Assembly into the Main Frame.
3.Slide the Main Shaft through the Upper BRG Housing, the Main Gear Assembly and the
Lower Bearing.
4.Line up the holes of the Autorotation Tail Drive Gear, the One Way Bearing Shaft and the
Main Shaft. Insert the Socket Screw and fix it with a M2 Nut. Do not forget to add some
Loctite and do not over tighten the screw.
5.Push the Main Rotor Hub downward slightly and put on the Main Shaft Lock Ring under
the Base Plate. Secure the Main Shaft Lock Ring with a Set Screw through the hole beside
the Base Plate. Make sure there is no play of the Main Shaft.
T22
(2)
(4)
(5)
(1)
(3)
Main Frame Assembly- 5
Ba g G
N ot e :
Use access
hole to tighten set screw