THUNDER TIGER E325 SE mini Titan, Manual

Page: 44 / 58

Main Frame Assembly- 2
Since you have been setting the lengths of the pushrod as mentioned,
the linkage should be centered well as described below.
Centering
1. The levers should be as the drawing below while centering the
collective pitch stick.
2. Parallel the flybar, the main blades should be at 0 degree and the
swashplate should be level.
SETTING UP MAIN ROTOR COLLECTIVE PITCH ANGLE
Minimizing
1. Place the collective stick at low end.
2. The main blades should be at 10 degree and the swashplate should
be level.
Maximizing
1. Place the collective stick at high end.
2. The main blades should be at 10 degree and the swashplate should
be level.
NOTE:
1. The steps above define the limits of the collective pitch setting.
2. The setting of the maximum collective pitch depends on your personal
flying skill and style. Too much collective pitch could overload the
ESC, motor and the battery. And it will reduce the flying time also.
0
*
10
*
-10
*
-43-