THUNDER TIGER E325 SE mini Titan, Manual

Page: 40 / 58

-39-
Level the Swashplate
After centering the servos, setting the length of the control linkages
and attaching them to the link balls, it is important to check the
swashplate that it is level. Turn on the transmitter and the receiver,
do not connect the Motor at this moment, and center the collective
pitch stick. Make sure all the trims and knobs are centered and the
pitch curve should be 0% at low end and 100% at high end at present.
The servo arms should be level. While the collective pitch stick is
centered and the servo arms are level, the swashplate is supposed
to be level. First, check the swashplate from the rear of the model to
insure if it’s level from left to right. If the swashplate is not level as
compared to the frame of the model, adjust either the left or right
servo control rods. Next, check the swashplate from a side of the
model to insure if it’s level from head to rear. If the swashplate is not
level, adjust the control rod of the servo in the back.
CONCEPT OF BASIC SETTING AND ADJUSTMENT
Level
Level