Theta Digital Mind'sEye, User’S Manual & Reference

Page: 29 / 64

Pre-Set Operation
21
3 Select the
program
key
Press the key that corresponds to the category your session is in —
relax
,
explore
,
learn
,
change
or
energize
. The left
led
will blink to indicate that the selection has
been made.
4 Select the program
number
Press the appropriate program
number
key on the bottom row of the keyboard. (The
first key on the left is
number
1, the second key
number
2 and so on.) The left
led
will blink again.
NOTE: In actuality, it doesn’t matter whether you enter the program
number
first or
the
program
first. To avoid confusion, though, we recommend that you make it a
habit of selecting your sessions in the same order we follow in this guide:
bank
-
program
-
number
If you make an error or change your mind while making the program
selection, simply turn the unit off and start again
.
5 Sound
options
NOTE: Select sound
options
after selecting
bank
,
program
, and
number
.
You do not have to select sound “
options
”. Each session will generate a sound and
run properly even if you don’t adjust these options. If you don’t want to modify the
sound, simply skip to step 6, and press
start
.
You can modify the sound in three ways:
1. Sound
2.
Pitch
3. Binaural
Selecting a sound
There are four different sounds available in the Mind’sEye
. Every session automati-
cally begins with one of these sounds; however, you can switch to any one of the
others, adjust the pitch, or add a binaural beat. You have maximum flexibility for
fine-tuning your experience.
Listen through your headphones when making your sound selections.
To begin, press and release the
sound
key. The sound you hear is the session’s “pre-
set” sound, which will automatically play if no other sound is selected. To sample the
other sounds, press and hold the
sound
key. This will cycle through the sound as
many times as you wish, playing each one for about two seconds. When you hear the
sound you want, simply release the key.