I
Page 17
installation, use and maintenance guide
Mon Amour
The following screen will appear:
At this point if no further programming is required for that day go to point 5-A.
If, on the other hand, you wish to program a second ON/OFF cycle for that day go to point 5-B.
5-A) Press the Menu Button to exit the screen, in order to enable you to program the times for the ON/OFF cycles for the other
days of the week. In this case repeat the instructions from point 2 up to this paragraph.
5-B) Press the Scroll Buttons to select the hour at which you wish the appliance to start up automatically for the second time
(ON2). The start up time will be that set before OFF1; this is to avoid setting a second start up time that is earlier than the
preceeding shut off time. Once the hour has been set, confirm the value by pressing the Flame Button. When scrolling the
ON2 values the OFF2 values will scroll as well; this is to avoid setting a shut off time that is earlier than the start up time.
Once confirmed, the selector shifts to the minute section of ON2. Press the Scroll Buttons to set the minutes for the second
start up. Confirm the value by pressing the Flame Button.
Now press the Scroll Buttons to select the hour at which you wish the appliance to shut off automatically (OFF2). Once the
hour has been set, confirm the value by pressing the Flame Button.
Once confirmed, the selector shifts to the minute section of OFF2. Press the Scroll Buttons to set the minutes for the second
shut off. Confirm the value by pressing the Flame Button.
At this point the second ON/OFF cycle for the selected day has been set.
The following screen will appear:
At this point if no further programming is required for that day go to point 6-A.
If, on the other hand, you wish to program a third ON/OFF cycle for that day go to point 6-B.
6-A) Press the Menu Button to exit the screen, in order to enable you to program the times for the ON/OFF cycles for the other
days of the week. In this case repeat the instructions from point 2 up to this paragraph.
6-B) Press the Scroll Buttons to select the hour at which you wish the appliance to start up automatically for the third time (ON3).
The start up time will be that set before OFF2; this is to avoid setting a third start up time that is earlier than the preceeding
shut off time. Once you have set the hour confirm the value by pressing the Flame Button. When scrolling the ON3 values
the OFF3 values will scroll as well; this is to avoid setting a shut off time that is earlier than the start up time..
Once confirmed, the selector shifts to the minute section of ON3. Press the Scroll Buttons to set the minutes for the third
start up. Confirm the value by pressing the Flame Button.
Now press the Scroll Buttons to select the hour at which you wish the appliance to shut off automatically (OFF3). Once the
hour has been set, confirm the value by pressing the Flame Button. Once confirmed, the selector shifts to the minute section
of OFF3. Press the Scroll Buttons to set the minutes for the third shut off. Confirm the value by pressing the Flame Button.
At this point the third and final ON/OFF cycle for the selected day has been set.
Alternatively, if you wish to copy
the exact same programming for the ON/OFF cycles set for a particular day to the next day simply
press the
Ventilation button
.
For example: if I want to copy all the programmed ON/OFF cycles set for Monday to Tuesday the following screen will appear:
I press the
Ventilation button
once again to copy all the cycles programmed for Tuesday to Wednesday. The following screen will
appear:
Using the same logic we can copy the programmed cycles to the other days.
7) To conclude the programming operations simply press the
Menu Button
several times to exit the box until the initial screen will
appear.
CAUTION: The appliance ignores any ON or OFF command programmed with a value of 00:00
. Consequently if
you do not wish to use an ON or OFF time setting simply set a value of
00:00
. The appliance ignores any ON or OFF
command if the shut off time is set the same as or before the start up time.
ATTENTION:
