I
Page 19
installation, use and maintenance guide
Mon Amour
2) To change the operating level, hold down a Scroll Button while simultaneously pressing the other Scroll Button.
To set the desired level simply press the
Menu Button
several times until the initial screen will appear on the display.
The level selection can be made with the appliance OFF or ON. If the change is made while the appliance is running
the difference in the flame will be apparent. It is mandatory to pay particular care when selecting the most appropriate
operating cycle for your installation. After the selection of the operating cycle a thorough cleaning of the brazier is
mandatory.
5.6 THERMOCOMFORT: ACTIVATING THE CONNECTION WITH THE HANDHELD RADIO CONTROL
(OPTIONAL)
The appliance must be energised and the I/0 switch in position “I".
This function enables you to activate the connection of the appliance with the optional THERMOCOMFORT handheld radio control
(See Para. 6).
The THERMOCOMFORT function can be activated by proceeding as follows:
1) Press the Menu Button five times quickly until the following screen appears:
After a few seconds the following screen will appear on the display:
2)
Press one of the two
Scroll Buttons
and the following screen will appear (Select ON to activate).
ATTENTION: It will only be possible to activate the THERMOCOMFORT function and select ON in the previous screen if the appliance
detects the radio control signal. It is therefore recommended to ensure that the radio control is energised and within close vicinity of
the appliance.
3)
To confirm the activation of the THERMOCOMFORT function or to exit the screen simply press the Menu Button to return
to the
initial screen.
The THERMOCOMFORT symbol will be present on the initial screen if the appliance is in the START or WORK stage:
The Thermocomfort function is automatically disabled when the appliance is OFF. It automatically reactivates at the next START up.
To disable the THERMOCOMFORT function simply repeat operations 1 and 2, but this time select the OFF command. The function
will be disabled immediately.
