THERMOROSSI CIAO, Manual

Page: 34 / 40

Pg. 34
14 – REPAINTING OF THE CASING MODEL CIAO
14.1 FOREWORD
If the customer prefers a colour that is not one of the standard colours available, the seller can remove the casing, as described in
this paragraph and have it painted the preferred colour.
CAUTION: The operations described below must be carried out by a trained technician. The paints used for the
casing must be suitable for continuous high operating temperatures above 110°C.
When dismantling the casing, place a layer of soft material between the heater and the floor in order to prevent
damaging both the floor and the casing.
14.2 DISMANTLING THE SIDE PANELS AND FRONT GLASS
Remove the side panels (A). Remove the front glass panels (B) by undoing the screws at the rear (C).
14.3 DISMANTLING THE STOVE BODY AND CASING
Lay the heater down as illustrated in the figure. Undo the six screws (D). Carefully pull the body away from the casing – at least two
people are required for this operation.
This operation must be carried out with the utmost care as the heater body is extremely heavy to move. THERMOROSSI S.p.A.
declines all responsibility for injury to persons or damage to objects caused by negligence.
To separate the two half shells of the casing, undo the screws (G) and remove the brackets (H). Undo the screws (I) and remove
the lower supports (L).
D
D
D
F
G
G
H
H
I
I
L
L
A
A
C
C
B
B