THERMOROSSI CIAO, Manual

Page: 17 / 40

Pg. 17
8.3 REPLACING THE BATTERY OF THE REMOTE CONTROL
When the infrared remote control does not send out the transmission signal (the led comes not on), the battery must be replaced.
Using a suitably sized Philips screwdriver, undo the screw of the battery cover on the back of the remote control and replace the
battery. The dead battery must be disposed of in compliance with the regulations in force.
8.4 REPLACING THE BATTERY OF THE CONTROL PANEL FOR MODEL CIAO
Inside the control panel there is a buffer battery
type CR2032. When the time and programming
are not being memorised, then the battery needs
replacing. Undo the two screws A which can be
reached by opening the pellet tank cover. Slide the
control panel B out from the back and undo screws
C to remove the protection D. Replace the battery.
The dead battery must be disposed of in
compliance with the regulations in force.
C
A
B
D
BATT. CR2032
(Figure – 5a) (Figure – 5b) (Figure – 5c)
(Figure – 6a) (Figure – 6b)