![background image](http://html1.mh-extra.com/html/thermofisher-scientific/912a0604/912a0604_manual_1105622040.webp)
Installing the iN10/iN10MX
This document contains confidential or proprietary information of Thermo Fisher Scientific. Neither this
document nor the information therein is to be reproduced, distributed, used or disclosed, either in whole or
in part, except as specifically authorized by Thermo Fisher Scientific.
8/3/2020
Page 40 of 61
42.10.
Change the aperture to 100 x 100 microns.
From the V
iew and
Collect
menu scroll down to the
Stage, Aperture and Display
section. Change the Aperture width and height to 100 x 100.
NOTE
Highlight and change the value and then use the tab key to
exit the dialog box and initiate the change. Make sure the change
occurred by seeing if the red virtual aperture has changed to
100 x 100 microns.
42.11.
Locate and focus on the pinhole.
Expand the joystick icon and
move the stage so the upper illumination spot is over the pinhole.
Use the X, Y, and Z controls to focus and bring the pinhole into the
video field of view (FOV). See the following page.
Highlight and change value
and then use the Tab key to
initiate change
Virtual aperture