![background image](http://html1.mh-extra.com/html/thermofisher-scientific/912a0604/912a0604_manual_1105622035.webp)
Installing the iN10/iN10MX
This document contains confidential or proprietary information of Thermo Fisher Scientific. Neither this
document nor the information therein is to be reproduced, distributed, used or disclosed, either in whole or
in part, except as specifically authorized by Thermo Fisher Scientific.
8/3/2020
Page 35 of 61
41.
Prepare to run the system performance tests.
Close
OMNIC Picta
.
Launch
DDiag
and from the
Window
drop down menu choose
Motor Control
.
Using the arrows to the right of each dialog box (X/Y micrometers); set the
aperture to 100 x 100.
42.
Run the system performance test in transmission mode.
From the
Diagnostics
drop down menu choose
Advanced Diagnostics
.
42.1.
Run the transmission TGS performance test.
From
Advanced
Diagnostics
, click the
Performance Test
button, click the TGS detector
icon, and then click
Run Test.
When the
Select Object and Final
Format
window appears, confirm the reflectance measurement box is
NOT
checked,
click OK to close the window
and then click OK to start
the test (refer to the following page). Record the test results for the IQ
documentation if applicable.