![background image](http://html1.mh-extra.com/html/thermofisher-scientific/912a0604/912a0604_manual_1105622045.webp)
Installing the iN10/iN10MX
This document contains confidential or proprietary information of Thermo Fisher Scientific. Neither this
document nor the information therein is to be reproduced, distributed, used or disclosed, either in whole or
in part, except as specifically authorized by Thermo Fisher Scientific.
8/3/2020
Page 45 of 61
42.22.
Remove the main cover.
Carefully remove the main cover being
careful not to disturb the pinhole alignment or bump any optical
components.
42.23.
Adjust the single point dichroic.
Depending on the location of
the IR, make a small adjustment to the appropriate dichroic screw
to align the IR to the video. Iterate between steps 42.18 through
42.23 until the IR and Video overlap and then continue with step 43.
43.
Verify imaging detector if applicable, if an imaging (array) detector is
not installed, continue with step 45.
43.1.
Change the aperture to 100 x 100 microns.
Moves IR
image
up/down.
CW = UP
CCW = Down
Moves IR
image
left/right.
CW = Right
CCW = Left