Installing the iN10/iN10MX
This document contains confidential or proprietary information of Thermo Fisher Scientific. Neither this
document nor the information therein is to be reproduced, distributed, used or disclosed, either in whole or
in part, except as specifically authorized by Thermo Fisher Scientific.
8/3/2020
Page 29 of 61
33.1.4.
Connect the joystick cable
. Connect the joystick to
the electronics module at the rear of the iN10.
33.2.
Turn the power on to the iN10.
Wait until the blue power LED’s
stop blinking and then proceed with step 33.3.
33.3.
Launch DDiag.
From the
Window
drop-down menu choose
Stage
Control
and initialize the XY stage (the joystick will
not
respond
until the XY stage is initialized).
33.4.
Configure the Visible Polarizer/Analyzer.
From the
Window
drop
down menu choose
User Configuration
. Check
Polarizer is
installed
.
If you do not have a polarizer, continue with step 33.5