![background image](http://html1.mh-extra.com/html/thermofisher-scientific/912a0604/912a0604_manual_1105622032.webp)
Installing the iN10/iN10MX
This document contains confidential or proprietary information of Thermo Fisher Scientific. Neither this
document nor the information therein is to be reproduced, distributed, used or disclosed, either in whole or
in part, except as specifically authorized by Thermo Fisher Scientific.
8/3/2020
Page 32 of 61
35.2.
Motorized Condenser stage.
From the
Window
drop down menu
choose
Motor Control
. From the
Select Stepper
(1) box, click the
arrow to the right (2) of the centered drop down menu and then use
the scroll bar (3) to find and select CM_DUR_DEV_CONDENSER.
In the
Steps to move
(4) dialog box enter 21500 and click the
arrow. This will move the condenser to its upper limit. The
Current
Location
(5) should change to ~21500 when complete, if not, raise
the Z stage as high as possible and try again. If the condenser still
does not reach ~21500, contact the factory.
Note:
You may need to toggle to another selection and back to the
Condenser to see the change.
5
4
3
2
1