![background image](http://html1.mh-extra.com/html/thermofisher-scientific/912a0604/912a0604_manual_1105622022.webp)
Installing the iN10/iN10MX
This document contains confidential or proprietary information of Thermo Fisher Scientific. Neither this
document nor the information therein is to be reproduced, distributed, used or disclosed, either in whole or
in part, except as specifically authorized by Thermo Fisher Scientific.
8/3/2020
Page 22 of 61
32.13.
Lower the Z stage.
Click and hold on the
Stage Control
tab and
drag and drop it away from the main diagnostic window. Expand
the
Stage Control
screen to view all controls. Click on the
Video
tab and click the joystick icon to expand the joystick and use the Z
stage focus control to lower the stage so it is approximately 1” from
the bottom of the objective.
32.14.
Prepare to adjust the video properties
. Place a white business
card on the center of the X-Y stage insert (print side down), turn on
the reflection illumination, and click on the joystick icon to access
the controls. If using a motorized stage, adjust the X-Y and Z stage
using the joystick, if using a manual stage, use the stage X-Y knobs
on the stage and the Z control of the joystick to move the stage until
the business card is in the beampath and in focus. Adjust
illumination as necessary. Refer to the following page.
TIP
Watch the light on the business card until the beam
begins to focus and then watch the video screen to focus on the
card.
Joystick
icon